¿Cómo se opera?

HELIXPLUG® is a self-supporting device, with its installation device it can be quickly and precisely placed into the borehole. Follow the instructions below:

​

1. Insert the HELIXPLUG® into the installation device.

2. Lower the device into the borehole at the desired depth

3. Give the cord a pull to release the HELIXPLUG®

4. You can touch the HELIXPLUG® with the same installation device to make sure the plug has been released.

5. Pull the installer out of the hole.

6. Fill the pit with at least 1.5 diameters of debris above the plug before pouring the explosive.

Important note: Make sure no rocks or debris fall into the well while the installation device is inside the borehole, this can cause that the installation device gets stucked into the well